Why There’s Sand in Your Swimming Pool and How to Get it Out

Why There’s Sand in Your Swimming Pool and How to Get it Out

If you’ve ever been swimming in a pool and felt something gritty on your feet, you may have wondered where the sand came from. It’s not just an inconvenience – if left unchecked, sand can cause serious damage to your pool. In this blog post, we’ll discuss where the sand comes from and how to get it out!

P.S. Is your pool full of sand and need help getting it out? We at Ultra Swimming Pool Specialist can help! With our years of experience, we are confident in our swimming pool services.

Why Do I Have Sand in My Pool?

There are a few reasons why you might find sand in your pool. The most common reason is that you have a sand filter. Sand filters are one of the most popular types of filters for inground pools.

They’re relatively inexpensive and they do a great job of filtering out dirt and debris. However, if your sand filter isn’t properly maintained, it can start to break down and release sand into your pool. This is usually due to a build-up of dirt and debris in the filter.

If your sand filter is the problem, it is usually due to a broken lateral or standpipe which can be easily replaced.

However, if you don’t have a sand filter, there are a few other possible reasons for the sand. One possibility is that your pool is located near a beach.

If this is the case, you may find sand in your pool after a storm or high tide. Another possibility is that your pool is located on or near a construction site.

Related Post:  How to Drain a Pool of Any Kind

Construction sites often use sand as part of the construction process and if your pool is located nearby, you may find sand in your pool.

How to Remove Sand from Your Pool

Now that you know where the sand is coming from, it’s time to remove it! The best way to remove sand from your pool is with a vacuum. Here’s how to do it:

Readying Your Pool Vacuum Pool Vacuum

A pool vacuum is a special vacuum that is designed to remove sand and debris from pools. Before you can use your pool vacuum, you’ll need to make sure that it is properly assembled and all of the hoses are securely attached.

You’ll also need to make sure that your pool’s skimmer basket is empty. The skimmer basket catches leaves and debris that fall into your pool. If it’s full, the vacuum will have a hard time picking up the sand.

To empty the skimmer basket, simply remove it from the skimmer and dump out the contents. This is a good opportunity to give the basket a good rinse with a hose to remove any debris that might be stuck to it.

Vacuuming Your Swimming Pool

Now that your pool vacuum is ready to go, it’s time to start vacuuming! Start by placing the vacuum head at the deepest part of your pool.

Then, slowly move the vacuum around the pool in a back and forth motion. Be sure to cover the entire floor of your pool so that you don’t miss any sand.

As you vacuum, the sand will be sucked up into the vacuum. The dirt and debris will be collected in the filter bag.

Related Post:  Should You Be Worried About Germs in Your Swimming Pool?

Once you’ve vacuumed the entire pool, empty out the filter bag and give your pool a good brush to remove any sand that might be clinging to the sides or bottom.

Final Thoughts

As you can see, removing sand from your pool is a relatively simple process. However, it’s important to make sure that you vacuum your pool on a regular basis to prevent the build-up of sand and debris.

If you have any questions about vacuuming your pool or if you need help troubleshooting a problem, be sure to contact a professional. They will be able to help you keep your pool clean and sand-free all season long!

Leave a Comment

Your email address will not be published. Required fields are marked *