If you have a swimming pool, then you know that it can be a lot of fun. However, pools can also be a lot of work – especially when it comes to cleaning them. One of the most common tasks that swimming pool owners face is removing stains from their pool. This can be difficult and time-consuming, but it doesn’t have to be. In this blog post, we will discuss how swimming pool specialists remove pool stains quickly and easily!
Identify the Pool Stain
Just like with any stain, the first step in removing a pool stain is to identify what kind of stain it is. This will determine the best course of action for removal. There are three main types of pool stains:
- Organic stains: These are caused by things like leaves, dirt, and suntan lotion.
- Metal stains: These are caused by metals in the water, like iron or copper.
- Other stains: These can be caused by things like oil, grease, or makeup.
There are a few different ways to remove each type of stain, so it’s important to identify the right one before you start.
How to Remove Organic Pool Stains
Organic stains are some of the most common – and easiest to remove. Here are the steps you need to take:
Remove leaves and other debris from the pool
It’s important to remove any leaves or other debris from the pool before you start cleaning, as this can make the stain worse.
If there are any large pieces of debris, you can use a net to remove them.
For smaller pieces of debris, you can vacuum them up.
You should also brush the sides and bottom of the pool to loosen any dirt or grime that might be attached.
Test the pH levels of your pool water
You want the pH to be between seven and eight – this is the sweet spot for pool water.
If the pH levels are too low, then you can add some baking soda to raise them. If the pH levels are too high, then you can add some Muriatic acid to lower them. This is important because the pH levels can affect how well the chlorine works.
If the pH levels are where they should be, then you can move on to step three.
Shock the pool
This is a process of adding a large amount of chlorine to the pool all at once. This will kill any bacteria or algae that may be causing the stain.
You can find chlorine specifically for shocking pools at your local pool supply store.
Once you’ve shocked the pool, you should see a significant improvement in the stain. If you don’t, then you can move on to step four.
Brush the Stain
If the stain is still there after you’ve shocked the pool, then you can try brushing it. This will help loosen any dirt or debris that may be stuck to the side of the pool.
You want to use a soft-bristled brush so that you don’t damage the surface of the pool. This is especially important if you have a vinyl pool.
Start by brushing the area around the stain and then work your way towards it. Once you’ve brushed the entire stain, you can move on to step five.
Run Your Pool’s Pump
To remove the stain, you need to run your pool’s pump. This will help circulate the water and remove any dirt or debris that is still in the pool.
You should run the pump for at least eight hours a day. If you have a large pool, then you may need to run it for longer.
Brush The Stains Away
Once you’ve run the pump for a few hours, you can start to brush the stain away. You may need to do this a few times before the stain is completely gone.
If you find that the stain is still there after you’ve brushed it, then you can try using a pool vacuum. This will help remove any stubborn stains. By doing this, you should be able to get rid of the stain for good!
How To Remove Metal Stains in Your Swimming Pool
Now that we’ve covered organic stains, let’s move on to metal stains. Metal stains are caused by metals in the water, like iron or copper. These stains can be tricky to remove, but there are a few things you can do.
Lower The Chlorine Levels
The first thing you need to do is lower the chlorine levels in your pool. You want the chlorine levels to be between one and three ppm.
You can lower the chlorine levels by using a chlorine lowering agent. This can be found at your local pool supply store.
Once you’ve lowered the chlorine levels, you can move on to step two.
The next thing you need to do is add algaecide to the pool. This will help kill any algae that may be causing the metal stains.
You can find algaecide at your local pool supply store.
Once you’ve added the algaecide, you should see a significant improvement in the metal stains. If you don’t, then you can move on to step three.
Apply Vitamin C on the Stain
This may sound strange, but applying Vitamin C on the stain can actually help remove it.
You want to use a powder form of Vitamin C for this. You can find this at your local pool supply store or online.
To apply the Vitamin C, you want to create a slurry. This is simply a mixture of water and Vitamin C powder.
Once you’ve created the slurry, you want to apply it to the stain using a brush. Be sure to brush in a circular motion.
You should see the stain start to fade within minutes. If it doesn’t, then you can move on to step four.
As you can see, there are a few different ways you can remove pool stains. If you follow these steps, you should be able to get rid of the stain in no time! Now that you know how to remove pool stains, you can enjoy your pool all summer long!
Do you have a pool at home? Has it ever gotten stained? If so, what did you do to remove the stain? Let us know in the comments below!